Changelog

• Translations updated.
• ATmega328 added to the controller list.

• now the kkmulticopterflashtool_SERIAL.cmd is added. Sorry missed to add it to the zip package.

• scanning for serial and parallel ports introduced in version 0.40 is disabled by default for Windows systems. Use the kkmulticopterflashtool_SERIAL.cmd to use the scanning version. Only necessary if you use a avrisp mkII or other programmer that uses serial or parallel interface.
• Smart LCD pro can now be flashed with the tool.
• ESC firmware from simonk for Atmel ATmega 8 based could be flashed now.
• Brownout level changed to 2.7V for all kkboards.
• reduced the start up time.
• Japanese, Romanian, Hungarian, Bosnian, Serbian and Norwegian translation added.
• Category filter only shows categories available for the selected board.
• GUI improvements.
• User setting can be read form EEprom, edited and saved back to the board.
• EEprom can be erased for all firmwares. So you can now reset your kkmulticopter board to defaults. This will not erase installed firmware, only settings in EEProm are affected.
• erasing lockbit added to flash HobbyKing Multi-Rotor Control Board V3.0
• bug that prevented lockbit erasion on ATmega48pa based boards fixed.
• new avrdude for Mac and Linux. Should solve AVRisp
• Linux 64 bit support added.

• HobbyKing HobbyKing Quadcopter Control Board V1 board is running again.
• HobbyKing Multi-Rotor Control Board V3.0 added to the list of supported hardware.
• Version 0.53.2 has a bug fix in the avrdude for Mac OS X

• avrdude updated to support the xwopen USBasp, select usbasp-clone from the list of available programmers. Thanks Artur.
• Flycam blackboard from kkmulticopter.kr and goodluckbuy.com are supported now.
• Problem with parallel installed winavr or Burn-O-Mat solved.

• bug-fix for parallel port programmers on Windows systems.
• Croatian translation fixed.
• Swedish translation updated.
• avrdude upgrade for Mac version. Hopefully you no longer need to install additional libraries.

• Support for Flycam Blackboard
• Scan ports for parallel ports to also support old STK200 programmers.
• MD5 check for downloads added. Only working now for files that have already the MD5 defined in the repository.
• Improvement of sending log-file.
• Greek translation added. Thanks to Panos.
• Croatian translation added. Thanks to Sinisa.

• Serial port is scanned for new devices every second. So there is no need to plug the programmer before the software starts.
• Should run now on Win7 64-bit without replacing the rxtxserial.dll.
• Should run now on Lion. When you have problems with libusb-1.0.0.dylib, copy it from the dmg to the /usr/local/lib folder. This can be done in the dmg.

• Improved USBtiny support.
• avrdude backend is updated to the newest version.
• available serial ports are now detected on software start. Make sure the programmer is plugged before software start. This is not necessary for AVRisp mkII, USBasp, usbtiny and other real usb programmers.
• Pololu programmer should work now in ISP mode. Select the correct serial port.

• Commandline options added:
  • add ”-c” to the start script after the kkmulticopterflashtool.jar to use the default color schema of the Java VM instead of the black background.
• Add device codes to Atmega 168 for AVR910 programmers.
• Add HobbyKing Quadrocopter Control V2.
• Korean translation added. Thanks to Jongho.
• Slovakian and Czech translation added. Thanks to Peter.
• Hebrew translation added. Thanks to Yair.
• Add flashing options to firmware descriptions.

Originally Posted by dt8666 Hi. Kornetto. Even it display +, can you power up and test the control to see if it fly as X?

Hi LZ Can you add to your tool to also clear the EEPROM? As the old configuration or data still in there and Mike's firmware will read from there. Our bootloader flash do the EEPROM clear as well.

Bugfix version. Version 0.31 prevented flashing the kk-board, because of malformed avrdude commands.

• advanced settings for some progger settings. Baud rate for STK500, STK500v2 to use arduinoISP correctly?
• Spanish translation added. Thanks to Ernesto.
• Russian translation added. Thanks to Artur.
• Portuguese translation added. Thanks to Jose.
• Info button added. You can now open an information page to all firmwares that have one.

Much thanks once again to all the people helping me with the translation.

• filter the firmwares for a controller by categories (e.g. Quadrocopter, XCopter, …)
• menu item added to send the latest log file.
• menu item added to send firmwares to me, so I could easyly add them to the tool.
• Danish translation added. Thanks to Falke.
• Brazilian translation added. Thanks to rcall.
• Polish translation added. Thanks to Andrzej.
• Faroese translation added. Thanks to Samal.
• Swedish translation added. Thanks to Patrik.
• Turkish translation added. Thanks to mcgyver_taner.
• Bugfixes to support the myAVR mySmart programmers better.

Much thanks once again to alll, John, Yanan and Marco for their efforts to update the translations.

• Chip erase for ATmega48PA based boards (first flashing of HobbyKing Quadcopter Control Board) added

• Force flashing checkbox removed.
• Native support for 48PA and A168P/PA versions of the Atmegas added.
• logging added to easy up the support. A file kkLogging.txt is written during every use of the software.
• Chinese translation added. Thanks to Yanan for his great work.

Much thanks once again to alll, John and Marco for their efforts to update the translations.

• Force flashing checkbox added to support also P/PA versions of the Atmega 168. Use this only if the controller on your board is a P/PA. For the 328P there is a separate controller in the list available.
  Only use if output is:

avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude.exe: Device signature = 0x1e940b
avrdude.exe: Expected signature for ATMEGA168 is 1E 94 06
Double check chip, or use -F to override this check.

avrdude.exe done. Thank you.

• Dutch translation added. Thanks to John.

• Italian translation added. Thanks to Marco
• offline mode. You can now download firmware by type to the offline folder of the tool, an use them in offline mode.

• bug-fix: now the tool restores the last used port correctly.
• bug-fix: added a CMD-script to start properly on Windows 7.